Categories
- CNC machines and OpenBuilds sets
- 3D printers and frames
- Aluminum profiles
- Plates
- Connecting elements for aluminum profiles
- CNC mechanics
- Electronics
- GoBilda systems
- GoBild Construction Elements
- GoBilda Motion Systems
- GoBild motors
- Servos
- GoBilda wheels and tires
- GoBilda gears
- Chain wheels and chains
- Belts and pulleys
- Belts and pulleys
- Round Belts & Pulleys
- Lead Screws
- Linear guides
- GoBilda hubs
- Handles with GoBilda bearings
- GoBilda rollers and tubes
- Spacers
- Shaft Spacers & Shims
- Collars
- Couplers
- GoBild joints
- GoBilda shock absorbers
- GoBilda rods and ball hinge
- Motion Bundles
- GoBilda Electronics
- GoBilda Hardware
- GoBilda sets
- Robots
- Lasers and CNC accessories
- Bosch Rexroth aluminium construction profile
- New products
- Products on sale
CNC Projects with
vslot-poland.com
Check out the projects - which you can realize with our elements!
Contact
Call us!
Chat to us!
Where are we?
2000 Series Dual Mode 25-3 servo
2000 Series Dual Mode 25-3 servo
1
product unavailable
Description
2000 Series Dual Mode 25-3 servo
Discover the Series 2000 Dual Mode "SPEED" servo.
This servo is basically the original 2000-0025-0002 'TORQUE' servo but equipped with lower torque to achieve higher speed!
This servo is over 2x faster than its counterpart and saves valuable time where it counts!
Like the 25-2, this servo offers two different modes that allow it to fulfill a variety of roles in a robot or project. In the default mode, the servo is able to turn 300 degrees with position feedback. In this mode, the PWM signal determines the position of the servo. By using the 3102 (1-1) series Dual Mode servo programmer, the servo can be put into continuous rotation mode. In this mode, the servo will have proportional speed control based on the PWM signal you are sending through the servo controller.
PRZYKŁADY AKCESORIÓW I
EXAMPLES OF ACCESSORIES AND APPLICATIONS (accessories available in our offer):
Technical data and illustraitions:
- Weight: 58g
- Gear ratio: 135:1
- Output shaft style: 25 teeth
- Voltage range: 4.8V ~ 7.4V
- No load speed (4.8 V): 0.11 sec / 60 ° (90 rpm)
- No load speed (6.0 V): 0.09 sec / 60 ° (115 rpm)
- No load speed (7.4V): 0.07 sec / 60 ° (145rpm)
- Torque at (4.8 V): 7.9 kg.cm (110 oz)
- Torque at (6.0V): 9.3 kg.cm (130 oz)
- Torque at (7.4 V): 10.8 kg.cm (150 oz)
- No-load current (4.8V): 190mA
- No-load current (6.0V): 200mA
- No-load current (7.4V): 230mA
- Maximum PWM range (default): 500 - 2500μsec
- Maximum PWM range (continuous): 1000 - 2000 μsec
- Travel per µsec (default): 0.15 ° / µsec
- Max Travel (default): 300 °
- Pulse amplitude: 3-5V
- Direction: Clockwise with increasing PWM signal
- Deadband width: 4μsec
- Motor type: Brushed DC
- Output shaft support: Double ball bearing
- Gear material: Steel
- Cable length: 300mm
- Wire gauge: 22 AWG
- Connector Type: TJC8 3 Position Servo Connector [MH-FC]