Categories
- CNC machines and OpenBuilds sets
- 3D printers and frames
- Aluminum profiles
- Plates
- Connecting elements for aluminum profiles
- CNC mechanics
- Electronics
- GoBilda systems
- GoBild Construction Elements
- GoBilda Motion Systems
- GoBild motors
- Servos
- GoBilda wheels and tires
- GoBilda gears
- Chain wheels and chains
- Belts and pulleys
- Belts and pulleys
- Round Belts & Pulleys
- Lead Screws
- Linear guides
- GoBilda hubs
- Handles with GoBilda bearings
- GoBilda rollers and tubes
- Spacers
- Shaft Spacers & Shims
- Collars
- Couplers
- GoBild joints
- GoBilda shock absorbers
- GoBilda rods and ball hinge
- Motion Bundles
- GoBilda Electronics
- GoBilda Hardware
- GoBilda sets
- Robots
- Lasers and CNC accessories
- Bosch Rexroth aluminium construction profile
- New products
- Products on sale
CNC Projects with
vslot-poland.com
Check out the projects - which you can realize with our elements!
Contact
Call us!
Chat to us!
Where are we?
Servo gear (24 spline teeth, 12 teeth)
Servo gear (24 spline teeth, 12 teeth)
This 12-tooth servo gearbox is most commonly used to drive a 108-tooth hub, 48mm apart, for an enormous 9: 1 gear ratio.
For a more compact setup, it also works with a 48-tooth hub gear set 24mm apart for a 4: 1 ratio.
- Material: Brass
- Number of teeth: 12
- Pressure angle: 20 degrees
Servo gear (24 spline teeth, 15 teeth)
Servo gear (24 spline teeth, 15 teeth)
This 15-tooth servo gearbox is most commonly used to drive a 105-tooth hub, 48mm apart, for an enormous 7:1 gear ratio.
This gear reduction will increase the torque on the gear of the hub to 7 times that produced by the servo. The sacrifice will be to reduce the range of motion and speed by a ratio.
Servo gear (24 spline teeth, 20 teeth)
Servo gear (24 spline teeth, 20 teeth)
This 20-tooth servo gearbox is most commonly used to drive a 100-tooth hub, 48mm apart, for an enormous 5:1 gear ratio.
This gear reduction will increase the torque on the gear of the hub to 5 times that produced by the servo. The sacrifice will be to reduce the range of motion and speed by a ratio.
Servo gear (24 spline teeth, 24 teeth)
Servo gear (24 spline teeth, 24 teeth)
This 24-tooth servo gearbox is most commonly used to drive a 96-tooth hub, 48mm apart, for an enormous 4:1 gear ratio.
This gear reduction will increase the torque on the gear of the hub to 4 times that produced by the servo. The sacrifice will be to reduce the range of motion and speed by a ratio.
Servo gear (24 spline teeth, 30 teeth)
Servo gear (24 spline teeth, 30 teeth)
This 30-tooth servo gearbox is most commonly used to drive a 90-tooth hub, 48mm apart, for an enormous 3:1 gear ratio.
This gear reduction will increase the torque on the gear of the hub to 3 times that produced by the servo. This gear can also be used to drive a 30-tooth gear 24 mm away for a 1:1 ratio.
Servo gear (24 spline teeth, 40 teeth)
Servo gear (24 spline teeth, 40 teeth)
This 40-tooth servo gearbox is most commonly used to drive a 80-tooth hub, 48mm apart, for an enormous 2:1 gear ratio.
This gear reduction will increase the torque on the gear of the hub to 2 times that produced by the servo. Ta przekładnia może być również używana do napędzania 20 zębatego koła zębatego oddalonego o 24 mm dla przełożenia 2:1.
Fast Shipping
About CNC we know a lot - we can help you
Guarantee for all of products
CNC, OpenBuilds i GoBilda!
Od kilku już lat specjalizujemy się we wszystkim co dotyczy frezarek CNC i Arduino. Robimy wszystko aby nasi Klienci sami mogli zbudować drukarkę 3D, slider do kamery, czy maszynę CNC do obróbki drewna i metalu. Jeśli zastanawiasz się czym ciąć profile aluminiowe lub jak zrobić prowadnicę do frezarki albo szukasz objawów uszkodzonego silniczka krokowego - służymy pomocą. Nasze produkty zawsze podlegają określonej gwarancji!
FAQ od V-slot
Zastanawiasz się jak długo będziesz czekał na swoją maszynę CNC, albo profile aluminiowe?
Zajrzyj do naszej sekcji informacyjnej.
Jesteśmy po to,
aby Ci pomóc!
Nie znalazłeś produktu, którego szukasz? Opis wybranego towaru nie jest dla Ciebie wystarczający? Jesteśmy po to, aby Ci pomóc!
Skontaktuj się z namiCNC, OpenBuilds and GoBilda!
For several years now, we have specialized in everything related to Arduino and CNC milling machines. We want to help our clients to build their own 3D printers, camera sliders or CNC machines for wood and metal processing. If you are wondering how to cut aluminum profiles or how to make a slider for a milling machine or you maybe are looking for symptoms of a damaged stepper motor - we are here to help.
Our FAQ
Are you wondering how long you will be waiting for your CNC machine or aluminum profiles?
Check out our information page.
We want to help you
in CNC shopping
You not you find a product you are looking for? Description of the selected product not sufficient for you? We are here to help you!
Feel free to contact with us!
